Marine Bedding Adhesive

Selsil Marine Bedding Adhesive is a one-component, moisture-cured, MS-based adhesive.


  • Easy to apply. – Free of solvents and isocyanates.
  • No release of volatile organic components (VOC’s) during curing.
  • No bubble formation.
  • High adhesion strength.
  • UV and weather resistance.
  • Resistant to fresh and salt water
  • Selsil Marine Deck and Bedding Adhesive is tested and certified to
    International Maritime Organization (IMO) Fire Test Procedures.



Chemical Base Hybrid-MS polymer
Curing Mechanism Moisture
Density 1,32 ± 0,03 g/ml
Tack free time 25-5 min. (23°C, 50% RH)
Cure rate Min. 2,5 mm/day(23°C, 50% RH)
Temperature Resistance -40°C to +90°C
Application Temperature 5°C to 35°C
Hardness 35 ± 5 Shore A
Elongation at Break %250 (ASTM D412)
Tensile Strength 2.2 N/mm2 (ASTM D412)

Selsil Marine Deck and Bedding Adhesive is an adhesive used on the decks, sills and keels of boats, yachts and merchant ships. Used to bond waterproof boards to the deck floor. Application surface should be clean, dry, free of dust and grease. Applicable with a caulking gun. The product should be shaped within 25 minutes after application. For optimal use of Selsil Marine Deck and Bedding Adhesive, apply in layers

of at least 2 mm thickness. Do not apply to frozen or wet surfaces. Keep out of reach of children. Avoid contact with eyes and skin. Wear gloves.