Selsil Marine Deck Sealant is a one-component, moisture-cured, high-strength, MS-based sealant.
Properties:
| Chemical Base | Hybrid-MS polymer |
| Curing Mechanism | Moisture |
| Density | 1,40 ± 0,03 g/ml |
| Tack free time | 25± 5 min. (23°C, 50% RH) |
| Cure rate | Min. 2,5 mm/day (23°C, 50% RH) |
| Temperature Resistance | -40°C to +90°C |
| Application Temperature | 5°C to 35°C |
| Hardness | 50 ± 5 Shore A |
| Elongation at Break | %300 (ASTM D412) |
| Tensile Strength | 3 N/mm2 (ASTM D412) |
Selsil Deck Sealant is used to fill the gaps between the teak boards used on the decks of boats, yachts and merchant ships and to maintain their elasticity. Application surface should be clean, dry, free of dust and grease. Selsil Primer should be applied before applying the product. After the primer has dried, Selsil Deck Sealant can be applied with a caulking gun. The product should be shaped within 25 minutes after application. Do not apply to frozen or wet surfaces. Avoid exposing the product to alcohol and solvents while it cures.
Warnings:
Keep out of reach of children. Avoid contact with eyes and skin. Wear gloves
