Water-Resistant Adhesive
Selsil Water-Resistant Adhesive is a two-part epoxy adhesive.
- Sets quickly.
Technical Specifications
| Product type | Epoxy |
|---|---|
| Resin density | 1.17 g/cm³ |
| Hardener density | 1.15 g/cm³ |
| Resin viscosity | 11500–13500 cPs (25°C) |
| Hardener viscosity | 15000 cPs (25°C) |
| Application temperature | 20°C to 80°C |
| Mixing ratio | 1:1 |
| Working time | 8–12 min (at 23°C) |
| Full cure time | 16 hours (at 23°C) |
| Service temperature | 5°C to 35°C |
| Hardness | 83 ± 3 Shore D |
Similar Products
Questions & Answers
It can be used on ceramic, wood and certain types of rubber.
No. It is not suitable for PP, PE or Teflon surfaces.
Yes. It is a resin and hardener system that dispenses the two components in equal amounts.
Leave it undisturbed for approximately 2 hours after application.
The working time is 8–12 minutes at 23 °C.
Full cure takes 16 hours at 23 °C.
It comes in a 28 g pack.