Deck Sealant
Selsil Deck Sealant is a single-component, MS-based sealing material. It cures with moisture. It has high strength and very good adhesion strength.
- It is easy to apply.
- It does not contain solvents and isocyanates.
- There is no VOC release during curing.
- It does not form bubbles.
- It shows excellent elasticity.
- It is resistant to UV rays and weather conditions.
- It can be sanded after curing.
- It is resistant to fresh and salt water.
Technical Specifications
| Product type | Hybrid-MS polymer |
|---|---|
| polymerization system | Moisture Curing |
| Density | 1.40 ± 0.03 g/ml |
| Surface Drying | 25-5min. (23°C and 50% RH) |
| Curing Rate | Min. 2.5 mm/Day (23°C and 50% RH) |
| Thermal Resistance | -40°C to +90°C |
| Application Temperature | 5°C to 35°C |
| Hardness | 50 ± 5 Shore A |
| Elongation at Break | 300% (ASTM D412) |
| Breaking Strength | 3 N/mm2 (ASTM D412) |
Packaging Options
- Black280 mlBox: 25 pcs
- Black600 mlBox: 20 pcs
Similar Products
Questions & Answers
Yes. It fills gaps between teak planks on the decks of boats, yachts and commercial vessels while keeping the joint elastic.
Yes. Apply Selsil Primer first to a clean, dry surface free from dust and grease. Apply the sealant after the primer has dried.
Tool it within 25 minutes of application.
Do not apply it to frozen or wet surfaces. The surface must be dry before application.
Yes. It resists fresh water, salt water, UV and weathering.
Yes. It can be sanded once cured.
Prevent the sealant from coming into contact with alcohol or solvents.
No. It is free from solvents and isocyanates and cures with moisture.