Deck Teak Adhesive
Selsil Deck Teak Adhesive is a one-component, MS-based adhesive. It cures with moisture. It has very good adhesion strength. Selsil Marine Deck and Bedding Adhesive has been tested and certified according to the International Maritime Organization (IMO) Fire Test Procedures.
- It is easy to apply.
- It does not contain solvents and isocyanates.
- There is no VOC release during curing.
- It does not form bubbles.
- It is resistant to UV rays and weather conditions.
- It is resistant to fresh and salt water.
Technical Specifications
| Product type | Hybrid-MS polymer |
|---|---|
| polymerization system | Moisture Curing |
| Density | 1.32 ± 0.03 g/ml |
| Surface Drying | 25-5min. (23°C and 50% RH) |
| Curing Rate | Min. 2.5 mm/Day (23°C and 50% RH) |
| Thermal Resistance | -40°C to +90°C |
| Application Temperature | 5°C to 35°C |
| Hardness | 35 ± 5 Shore A |
| Elongation at Break | 250% (ASTM D412) |
| Breaking Strength | 2.2 N/mm2 (ASTM D412) |
Packaging Options
- Brown280 mlBox: 25 pcs
- Brown600 mlBox: 20 pcs
Similar Products
Questions & Answers
It is used on the decks, trim and keels of boats, yachts and commercial vessels. It is suitable for bonding waterproof panels to deck floors.
Application in layers at least 2 mm thick is recommended.
Tool it within 25 minutes of application.
No. The surface must be clean, dry and free from dust and grease. Do not apply it to frozen or wet surfaces.
Yes. It resists both fresh and salt water.
Yes. It is resistant to UV and weathering.
No. It is a one-component, moisture-curing product applied with a sealant gun.
No. It is free from solvents and isocyanates.