Marble and Stone Adhesive
Selsil Marble and Stone Adhesive is a two-part adhesive based on unsaturated polyester resin. It sets when combined with a hardener and is easy to apply.
- Retains its colour over time.
- Does not separate, crack, soften or bend at temperatures from −20 °C to +100 °C.
- Does not give off odour.
- Resistant to solvents, alkalis and dissolved acids.
Technical Specifications
| Product type | Synthetic resin |
|---|---|
| Application temperature | −5°C to 35°C |
| Density | 1.80±0.03 g/cm³ |
| Pot life | 3–5 min with 1–3% hardener |
| Set time | 6–9 min with 1–3% hardener |
| Hardness | 95±5 Shore A (after 24 hours) |
Packaging Options
- Cream250 gBox: 24 pcs
- Cream1000 gBox: 12 pcs
Similar Products
Questions & Answers
Yes. In addition to marble and stone, it can be used on ceramic, wall tiles, decorative ceramic tiles, mosaic tiles, terracotta, concrete and wood.
Yes. It is a two-component adhesive consisting of polyester resin and hardener.
With 1–3% hardener, the working time is 3–5 minutes.
With 1–3% hardener, the hardening time is 6–9 minutes.
It retains its colour permanently.
It can be applied at temperatures from −5 °C to +35 °C.
This cream-coloured product is available in 250 g and 1,000 g packs.