Mirror Silicone
Selsil Mirror Silicone is a single-component, neutral-cure silicone with a low modulus and high elasticity. It applies easily with a sealant gun.
- Adheres well to many surfaces without a primer.
- Does not cause metal corrosion.
- Low odour.
- Resists UV exposure and temperature extremes.
Technical Specifications
| Product Type | Silicone polymer |
|---|---|
| Cure system | Neutral (oxime) |
| Density | 1.02±0.03 g/ml (TS 781 ISO 758) |
| Hardness | 20 Shore A |
| Tensile Strength | >1.2 N/mm2 (23°C and 50% RH) |
| Surface drying time | 12–13 min (23°C and 50% RH) |
| Cure Rate | Min. 2.5 mm/day (23°C and 50% RH) |
| Breaking strength | 1.5 N/mm2 (ASTM D412) |
| Elongation at Break | >200% |
| Sag | 2 mm |
| Application Temperature | 5°C to 40°C |
| Temperature Resistance | -5°C to +150°C |
Packaging Options
- Transparent280 mlBox: 25 pcs
Application Videos
Practical ways to use products correctly
Similar Products
Questions & Answers
It provides strong adhesion to glass, ceramic, steel and aluminium surfaces.
No. It is neutral-curing and does not cause metal corrosion.
Yes. It bonds to the surface to form a watertight seal.
Yes. It is a low-modulus silicone with high elasticity.
Skin formation takes 12–13 minutes at 23 °C and 50% relative humidity. Under the same conditions, the cure rate is at least 2.5 mm per day.
It has a low odour and is easy to apply with a sealant gun.
Yes. It is UV-resistant.
The application temperature range is 5–40 °C.