Fast Curing Adhesive Foam

Selsil Fast Curing Adhesive Foam is a one-component polyurethane mounting foam that is cured by atmospheric moisture and can be used for bonding of thermal insulation boards (Polystyrene XPS/EPS) and decorative materials such as jambs.

Özellikler

Fast Curing Adhesive Foam is a one-component, polyurethane-based adhesive foam that is cured by atmospheric moisture and can be used for bonding of the building thermal insulation boards (Polystyrene XPS/EPS) and the decorative construction elements such as jambs. It can also be applied in buildings to fill and insulate the gaps between the building elements.
Provides much better performance than conventional bonding materials thanks to its fast cure mechanism and ease of use.

WHERE CAN I GET?

PRODUCT FEATURES

	Gun Grade
Chemical Base	Polyurethane
Curing Mechanism	Atmospheric Moisture
Density	18 ± 2 kg/m³
Tack Free Time	2 min.
Cutting Time (1cm width)	10-15 min.
Fire Resistance	B3 (DIN 4102-1)
Compression Strength	25 kPa (DIN 53421)
Tensile Strength	45,11 kPa (SO1926-79)
Foam Yield	30-45 L (ASTM C1536)
Dimensional Stability	<-5% (ISO2796/86)
Optimum Application Temperature	min. 20°C max. +25°C
Temperature Resistance	-30°C to +80°C
Application Temperature	5°C to +35°C

Application Details
Points to be considered in the application of Fast Curing Adhesive Foam;
• Before the application, old coatings that are thought to be compromised on the substrate to be bonded are scraped and smoothed with surface repair mortars.
• The application surface should be hard, clean, and free of grease and dirt. The surface can be cleaned with pressurized water if not sufficiently clean,
• Dry surfaces should be moistened before starting the process.
• Before starting to foam, the can should be shaken homogeneously 30 times. Low temperature cans should be kept at room temperature for 20 minutes before use.

Storage is 12 months when stored at +5ºC/41ºF to +25ºC/77ºF.

OTHER PRODUCTS